Thermaltake FRIO OCK CPU Cooler – Designed for Overclocker King, 6 Heat pipes, 2 x 130mm Fans
Category
Cooling > CPU Cooling > Thermaltake
Product Specifications
- Ultimate Overclocking Thermal Structure Design, support up to 240W. - Integrated Module for Dual 130mm VR™ OC Fan and the dazzling Cover.- Universal Socket Compatibility & Accessory Package.
Ultimate Overclocking Thermal Structure Design, supports up to 240W. - Dual tower heat-sink with 0.4mm aluminum fins provide large surface for heat dissipation.- 6 x Ø6 mm-U-shape copper heat pipes for accelerated heat conduction.s- Tower side flow design efficiently optimizes cooling performance. - Premium thermal grease maximizes heat transfer from the CPU into the cooler copper base for rapid dissipation. Integrated Module for Dual 130mm VR™ OC Fan and the dazzling Cover - Single VR control knob adjusts fan speed from 1200~2100rpm. - Overclocking efficiency with Starcraft II design. - Convenient and Tool-less design for dismantle and install the fan module. Universal Socket Compatibility & Accessory Package - All-in-one back-plate design, support all Intel and AMD platform - Universal socket support : Intel: LGA1366, LGA1156/LGA1155, LGA775 AMD: AM3, AM2+, AM2
Installation Guide
Intel Motherboard Installation
Step 1
Step 2
Before installing the CPU cooler onto the motherboard, you need to remove the fan module. As the arrows in the picture show, first pull the fixation levers carefully apart and then lift the fan module to the top.
Now remove the protective tape from the cooler bottom. Use a screwdriver to attach the spring-screws to the cooler bottom.
Step 3
Step 4
Now use the Thermaltake universal back-plate and install it onto the backside of your motherboard.
In the next step install the four black plastic nuts from the front of the motherboard onto the screws of the back-plate.
Step 5
Step 6
Now fix the retention module onto the black nuts and install the metal nuts on top of the screws to fix the retention module.
It’s time to apply the bundled thermal paste.
Step 7
Step 8
To fix the CPU cooler to the motherboard, use a screw driver and install the spring screws tightly.
Now put the fan module onto the heat-sink and make sure it is installed tightly.
Step 9
In the final step, plug the fans’ power cord into the corresponding power connector on the motherboard.
AMD Motherboard Installation
Step 1
Step 2
Before installing CPU cooler onto Motherboard, you need to remove fan cover. As the arrow in the picture, pull out two sides of fan cover and then lift it up.
First remove the protective tape from the cooler bottom, and then use a screwdriver to attach the spring-screws to the cooler bottom.
Step 3
Step 4
Again use a screwdriver in order to remove the pre-installed retention module and back-plate from the motherboard.
Now use the Thermaltake universal back-plate and install it onto the backside of your motherboard.
Step 5
Step 6
In the next step, install the four black plastic nuts from the front of the motherboard onto the screws of the back-plate.
Now fix the AMD processor retention module onto the black nuts.
Step 7
Step 8
Install the metal nuts on top of the screws to fix the retention module and apply the bundled thermal paste.
To fix the CPU cooler to the motherboard use a screw driver and install the spring screws tightly.
Step 9
Step 10
Now put fan cover onto the heat-sink and make sure it is installed tightly.
In the final step plug the fans’ power cords into the corresponding power connectors on the motherboard.
Dimension
Air Flow Chart
Angle View
Top View
Front View
Side View
Back View
Model
FríoOCK
P/N
CLP0575
Compatibility
Intel SocketLGA 1366 Core i7LGA1156/LGA1155 Core i7Core i5Core i3LGA 775Core 2 ExtremeCore 2 Quad Core 2 Duo Pentium D Pentium 4 Pentium Celeron D Celeron AMD Socket AM3Phenom II X6 Phenom II X4 Phenom II X3Phenom II X2 AM2+ / AM2Phenom X4 Phenom X3Athlon 64 FX Athlon 64 X2 Athlon 64 Sempron
